Danfoss offers a wide variety of crimp machines to build hose assemblies. These tools are designed, tested and built to Danfoss engineering standards to enable users to build high-quality hose assemblies every time, time after time.
Variable Crimp Machines
ET 1187 Crimper
Danfoss is proud to add the ET1187 crimp machine to its line of portable crimpers. While being our most economical variable crimp machine to date, the new ET1187 machine boasts a broad crimp capability with a new “ease-of-use” that is sure to please hose assemblers in the field.
Capability:
Spiral Hose: -6 through -16
Braided Hose: -4 through -20
Low Production Volume
Benefits:
Colour-coded collar for fast and easy setup.
Easily transported between job sites.
Versatile power source options.
Lower investment cost than other variable crimpers.
Features:
Can be mounted on service vehicles or benchtops.
Can be used remotely, 65lbs.
Can be powered with virtually any 10,000 psi hydraulic power source
Utilizes existing FT1380/ET4020 dies.
FT1380e Electronic Crimper
A first-of-its-kind, all-in-one crimper evolved from the FT1380 that uses the same tooling. It features an electronic, easy-to-use touchscreen with sleek, modern display crimp specs pre-loaded on the machine for easy access.
Capability:
Spiral Hose: -6 through -20
Braided Hose: -4 through -20
Medium Production Volume
Features:
Design based on the FT1380 and utilizes the same tooling.
Industrial-grade touchscreen & Easy-to-use interface.
Integrated help feature.
Preloaded crimp specs.
Variable retract positioning.
Benefits:
Reduced assembly time.
Reduced operator error and waste.
Safe and reliable hose assemblies.
Comes with high-efficiency PTFE grease.
USB included.
FT1390 Crimp Machine
The FT1390 crimp machine is a stand-alone machine and will crimp up to 2″ braided, 2” four-wire spiral, and 2” six-wire spiral hydraulic hose assemblies. It boasts a programmable electronic keypad with 10 presets.
Capability:
Spiral Hose: -6 through -32
Braided Hose: -4 through -32
High Production Volume
Features:
Front-end loading design.
Electronic keypad control of crimp diameter.
Power return stroke, return limit control.
Drop-in tooling (crimp die cages).
Backstop fitting locator.
Worklamp equipped.
Benefits:
Easy and quick to electronically enter crimp setting.
Can pre-program the 10 most popular crimp settings.
Die cages easily slip in and out of the machine.
Comes with high efficiency PTFE grease.
Positive-stop Crimp Machines
ET1000 Portable Crimp Machine
The portable ET1000 crimp machine boasts a broad crimp capability with an ease of use that is sure to please hose assemblers. With four pump options—air/hydraulic, hand, 110v, or 12v DC—this machine can be used in the shop and travel to the worksite. The machine comes equipped with a stand pre-drilled for mounting to a workbench or tabletop. An optional wall/truck mount stand is also available. Be sure to check out our optional handle kit and portability kit designed for use with this machine.
Capability:
Spiral Hose: -6 through -16
Braided Hose: -4 through -16
Low Production Volume
Benefits:
Sliding pusher allows for easier fitting insertion.
Simple positive-stop crimp diameter control system.
Easily transported between job sites.
Versatile power source options.
Electricity is required only when using an electric pump.
Comes with high-efficiency PTFE grease.
Features:
Portable, positive stop, economical.
Can be mounted on service vehicles.
Utilizes 2-piece collet assemblies.
Spacer rings to control the crimp diameter.
T-420 Crimp Machine
The T-420 is a versatile machine ideal for your shop, factory, construction, and mine locations. Large capacity combined with lever-activated crimping gives you wide coverage and a quick and simple way to make factory-quality hose assemblies.
Capability:
Spiral Hose: -6 through -20
Braided Hose: -4 through -20
Medium Production Volume
Features:
Positive stop, economical.
Can be mounted on a bench or the C-40X cabinet.
Utilizes 2-piece collet assemblies.
Spacer rings to control the crimp diameter.
Benefits:
Simple positive-stop crimp diameter control system
for a consistent crimping.
Versatile power source options.
Comes with high-efficiency PTFE grease.
ET4001 Crimp Machine
The ET4001 is ideal for factory, high-performance machine operations, construction, and mine locations. This machine offers the capabilities of crimping all of our crimp style hose ends through -32. With this coverage, this heavy-duty crimper can handle all of your crimping needs. This machine can be mounted to your bench, work table, or our crimper cart.
Capability:
Spiral Hose: -6 through -32
Braided Hose: -4 through -32
Medium Production Volume
Features:
Shop/work table mount, positive stop.
Features a two-stage pump providing high flow
at low pressure for fast ram approach
and low flow at high pressure for actual crimping.
Benefits:
Ideal for factory, construction, and mine locations.
Crimps up to 2” 6-wire spiral hose.
Comes with high-efficiency PTFE grease.